Product Description
Designed to work in the harshest environments! Stainless steel wrapped probe cable. Works with any of our Top Ferrous or Top Dual FNF Elcometer 456 Separate Gauges.
Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.
With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.
When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.
Specifications:
- Range: 0-60 mils (0-1500µm)
- Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
- Resolution: 0-60 mils (1µm: 0-1500µm
- Minimum headroom: 85mm (3.50")
- Minimum sample diameter: 5mm (0.59")
| Scan Mode When the Scan Mode* is selected users can slide the Ultra/Scan probe over the entire surface area. As the probe is lifted off the surface the gauge displays the average coating thickness value, the highest thickness and the lowest thickness values. Each set of three readings (average, high and low) can be displayed on the run graph and stored into the memory. During each scan the Elcometer 456 displays the live thickness reading together with an analogue bar graph which graphically indicates the thickness relative to both the nominal thickness and any user-defined limits. |
| | |
| |  |  |  |
| | Scan Mode* stores the average, highest and lowest readings over a test area | During a scan the live reading together with an analogue bar graph is displayed | The Run Chart displays the average thickness as well as the highest and lowest readings for each scan |
| | | | |
 | Auto Repeat Mode When the Ultra/Scan Probe is slid over the coated surface in Auto Repeat Mode*, a reading is taken approximately every half a second. Each individual reading is stored into the memory. With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas. |
| | | | |
| |  |  |  |
| | Auto Repeat Mode* measures and stores into memory over 140 individual readings per minute | The gauge updates and displays the statistical values as each individual reading is taken | The Run Chart displays each individual reading allowing the user to identify any significant trends |
| | | | |
The Ultra/Scan Probe with replaceable end caps for increased durability | Ultra/Scan Probe Featuring a highly durable ‘snap on’ replaceable probe cap, the Elcometer 456 Ultra/Scan Probe is a revolutionary design which allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating. |
