Coating Adhesion Testing | Concrete

Concrete Adhesion Tester | 0-500psi | Elcometer 106

The Elcometer 106/6 Adhesion Tester has been specifically designed to measure coatings on concrete.

Operating in a similar way to the regular Elcometer 106 Adhesion Tester, the Elcometer 106/6 allows for a 50mm (2”) diameter dolly for adhesion testing coatings on concrete.

• Fully portable and is supplied in a carry case - ideal for site tests

Automatic Pull-Off Adhesion Tester | 50mm Concrete Kit | Model S | Elcometer 510

The Elcometer 510 Automatic Pull-Off Adhesion Tester accurately measures the strength of the bond between the coating and the substrate.

• Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable results
• Set adjustable pull rates @ 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s(5, 8, 16, 24, 30psi/s)
• Can be used with 10,14.2, 20 and 50mm diameter dollies

Automatic Pull-Off Adhesion Tester | 50mm Concrete Kit | Model T | Elcometer 510

The Elcometer 510 Automatic Pull-Off Adhesion Tester accurately measures the strength of the bond between the coating and the substrate.

• Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable results
• Fully adjustable pull rates 0.1-1.4MPa/s (14.5-203psi) to meet National and International Standards
• Can be used with 10,14.2, 20 and 50mm diameter dollies
• Data Output via Bluetooth®
• Pull rate graphs
• Batch review

Araldite Epoxy Adhesive | Two (2) 15ml Tubes | For use with Elcometer 106 Pull Off Adhesion Tester

Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes

Spare Dollies 50mm (2”) Diameter (Pack of 5)

Package of 5 spare dollies for Elcometer 106 concrete adhesion tester.

Spare Dollies 50mm (2”) Diameter (Pack of 5) - Blasted

Package of 5 spare dollies for Elcometer 106 concrete adhesion tester - blasted.

Standard Skirt for 50mm Dollies

Can be configured to work with any Elcometer 510 or 506 dollie diameter simply by unscrewing existing skirt from actuator and replacing with a skirt appropriate to the dollie size.

50mm Aluminum Dollies | Pack of 4

50mm Stainless Steel Dollies | Pack of 4

Dolly Cutter for 50mm Dollies

To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.

As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.

Dolly Cutter Handle for 50mm Dollies

To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.

As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.