Adhesive Tapes

Cross Hatch Adhesion Tape | ASTM D3359-22 | Elcometer 99

Elcometer 99 Tape is used to assess the adhesion of ductile coatings to metallic substrates according to the ASTM D3359-09, ASTM D3359-17 and ASTM D3359-22 standards. It may be used for both referenced test methods: ASTM D3359 Method A – X-Cut Tape Test and ASTM D3359 Method B – Cross-Cut (Cross Hatch) Tape Test.

This tape has been batch tested at the factory using ASTM Test Method D3330/D3330M, Test Method A. This method is equivalent to the Pressure Sensitive Tape Council (PSTC) 101 standard - commonly known as PSTC 101. A copy of the batch test certificate relevant to each roll is included with purchase.

Two Roll Pack, ASTM D3359 Cross Hatch Adhesion Test Tape | Elcometer 99

Buy two rolls and save! 

Elcometer 99 Tape is used to assess the adhesion of ductile coatings to metallic substrates according to the ASTM D3359-17, ASTM D3359-09 and ASTM D3359-22 standards. It may be used for both referenced test methods: ASTM D3359 Method A – X-Cut Tape Test and ASTM D3359 Method B – Cross-Cut (Cross Hatch) Tape Test.

This tape has been batch tested at the factory using ASTM Test Method D3330/D3330M, Test Method A. This method is equivalent to the Pressure Sensitive Tape Council (PSTC) 101 standard - commonly known as PSTC 101. A copy of the batch test certificate relevant to each roll is included with purchase.

ISO 2409 & ISO 8502-3 Tape, Single Roll:

Used in accordance with the ISO EN 8502-3 Dust Assessment Test and ISO EN 2409-2013 Cross Hatch and Knife Adhesion Test.

ISO 2409 Tape | Two (2) Rolls

This tape is recommended for use with coatings up to 5 mils thick and is also acceptable for use with ISO 2409.