|
|
Elcometer Qualicoat Powder Coating Inspection Kit
 | The Qualicoat Organisation brings together the ideals of several national coating associations into one quality label for the powder coating applied to aluminium architectural applications. The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet. Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products. The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of this organization.
Qualicoat Kit |
Model |
Description |
Customizable1 |
Elcometer 480 |
Basic Glossmeter: 60° |
|
Elcometer 3095 |
Buchholz Hardness Tester |
|
Elcometer 1506 |
Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels |
|
Elcometer 1615 |
Base Unit and Tube Assembly and Kit B: ISO 6272/2 and BS 6496 |
|
Elcometer 1620 |
Manual Cupping Tester - Dial Gauge, mm/mils |
|
Elcometer 1542 |
Cross Cut Kit (Includes 3 Cross Hatch Cutters) |
|
Elcometer 1539 |
99 Adhesive ASTM D3359 Tape |
• |
Elcometer 215 |
Oven Data Logger Top Kit(215 Standard in Basic Kit) |
|
Elcometer 415 |
FNF Integral Digital Coating Thickness Gauge for smooth surfaces (Basic Kit Only) |
|
Elcometer 456 |
Model T Dual FNF Separate Digital Coating Thickness Gauge(Top Kit Only) |
|
Elcometer 456 |
FNF Scale 1 Standard Probe; 0-1500µm / 0-60mils(Top Kit Only) |
|
1To customize your order please send a descriptive email to sales@elcometerusa.com with your online order number. Or Place your order over the phone 1.800.521.0635 A wide range of K-type temperature probes is also available. These are not supplied with the kit and must be ordered separately. |
|
|
|
|