Half Cell and Covermeter Combined

Concrete Covermeter | Basic Version With Half Cell (Corrosion of Rebar) Capability | MKII | Elcometer Model 331

This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation and depth of rebar, but also the potential for rebar loss due to corrosion.

Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.

Concrete Covermeter | Standard Version With Half Cell (Rebar Corrosion) Capability | Elcometer Model 331

This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of rebar, but also the potential for rebar loss due to corrosion.

Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.

Concrete Covermeter With Half Cell (Rebar Corrosion) Capability | Top Version | MKII | Elcometer Model 331

This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of rebar, but also the potential for rebar loss due to corrosion.

Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.

Concrete Covermeter | Top Dual (Steel/Stainless) with Half Cell Capability | Elcometer Model 331

This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of both high tensile steel and stainless steel rebar, but also the potential for corrosion.

Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.

Copper Half Cell Probe Kit for Elcometer 331

Elcometer model 331 half cell probe kit, Cu/CuSO4. Half-Cell is a sealed unit so there is no need to mix chemicals on site. Supplied with a 25m (80ft) cable, every Half-Cell Kit is guaranteed for 5 years.

Silver Half Cell Probe Kit for Elcometer 331

Elcometer model 331 half-cell probe kit, Ag/AgCl. Half-Cell is a sealed unit so there is no need to mix chemicals on site. Supplied with a 25m (80ft) cable, every Half-Cell Kit is guaranteed for 5 years.

Standard Search Head for Elcometer 331

Elcometer model 331 standard search head. Works with all Elcometer 331 MKII covermeters. Works up to 3.75" depth.

Narrow Pitch Search Head for Elcometer 331

Elcometer model 331 narrow pitch search head. Works with all Elcometer 331 MKII covermeters. Measures cover when gaps between rebars (pitch) are close together. Works up to 3.1" depth.

Deep Cover Search Head for Elcometer 331

Elcometer model 331 deep cover search head. Works with all Elcometer 331 MKII cover meters. Works up to 7in depth.

Dual Search Head For High Tensile and Stainless Steel for Elcometer 331

331 MARK II dual deep cover search head. Detects high tensile steel and three grades of stainless steel (304, 316 and Duplex). Reads up to 7" deep. For use with Elcometer 331 model THD only.

Borehole Probe for Elcometer 331 | 0 - 40cm

Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.

Borehole Probe for Elcometer 331 | 0 - 100cm

Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.

Borehole Probe for Elcometer 331 | 0 - 16in

Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.

Borehole Probe for Elcometer 331 | 0 - 40in

Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.

Extension Arm for Elcometer 331

This kit allows the user to scan bridge decks and floor areas from a standing position. It can be connected to either the standard or narrow pitch search heads.

331 MARK I & II BATTERY CHARGER & MAINS LEAD / 110V