When the covermeter readings are combined with half cell readings, the user has a powerful surveying tool. This can be easily achieved using the Elcometer Covermaster® software.
Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
Works with all Elcometer Model 331 MKII covermeters. The solution for locating tendon ducts and multiple layers of rebar lying deep within the concrete.
This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of rebar, but also the potential for rebar loss due to corrosion.
Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.
Elcometer
3312 Models BH, SH,
TH and THD are not supplied with a Search Head / Half Cell Probe as
standard. Please select the required
Search Head / Half Cell Probe required from the product accessories list.
This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation and depth of rebar, but also the potential for rebar loss due to corrosion.
Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.
Elcometer
3312 Models BH, SH,
TH and THD are not supplied with a Search Head / Half Cell Probe (Corrosion of Rebar) as
standard. Please select the required
Search Head / Half Cell Probe required from the product accessories list.
This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of rebar, but also the potential for rebar loss due to corrosion.
Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.
Elcometer
3312 Model HM is
not supplied with a Half Cell Probe as standard. Please select the required Half Cell Probe
required from the product accessories list below.
This easy to use concrete cover meter not only quickly and accurately identifies the location, orientation, depth and diameter of both high tensile steel and stainless steel rebar, but also the potential for corrosion.
Designed to meet IP65 this all-in-one rugged waterproof concrete cover meter can be used in the harshest of environments.
Elcometer
3312 Models BH, SH,
TH and THD are not supplied with a Search Head / Half Cell Probe as
standard. Please select the required
Search Head / Half Cell Probe required from the product accessories list.
Elcometer model 331 half cell probe kit, Cu/CuSO4. Half-Cell is a sealed unit so there is no need to mix chemicals on site. Supplied with a 25m (80ft) cable, every Half-Cell Kit is guaranteed for 5 years.
331 MARK II dual deep cover search head. Detects high tensile steel and three grades of stainless steel (304, 316 and Duplex). Reads up to 7" deep. For use with Elcometer 331 model THD only.
This kit allows the user to scan bridge decks and floor areas from a standing position. It can be connected to either the standard or narrow pitch search heads.
Elcometer model 331 narrow pitch search head. Works with all Elcometer 331 MKII covermeters. Measures cover when gaps between rebars (pitch) are close together. Works up to 3.1" depth.
Elcometer model 331 half-cell probe kit, Ag/AgCl. Half-Cell is a sealed unit so there is no need to mix chemicals on site. Supplied with a 25m (80ft) cable, every Half-Cell Kit is guaranteed for 5 years.