Sag Tester - Metric | Elcometer 4270

Sag Tester | Metric | 25-150µm | Elcometer 4270/2

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Metric | 75-300µm | Elcometer 4270/1

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Metric | 100-600µm | Elcometer 4270/4

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Metric | 350-1500µm | Elcometer 4270/3

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.