Sag Tester - Imperial | Elcometer 4270

Sag Tester | Imperial | 3-12mils | Elcometer 4270/1

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Imperial | 4-24mils | Elcometer 4270/4

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Imperial | 14-60mils | Elcometer 4270/3

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.

Sag Tester | Imperial | 1-6mils | Elcometer 4270/2

Made from stainless steel, the straight scraper has 10 notches of increasing clearance. The Elcometer 4270 Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top. The thickness at which the stripes join indicates the tendency to sag.