Manual Clemen Unit | Elcometer 3000

Manual Clemen Unit | Elcometer 3000

Designed to evaluate resistance to scratching, a tool is fitted with an hemispherical end of 1mm (0.04”) diameter (standard), lowered gradually on to the surface of the sample and moved 60mm (2.36”). The sample width must be approximately 75mm (2.95 ).

Depending on the load applied, varying degrees of penetration of the tool into the coating are observed, from a superficial trace to total destruction. As the sample is pulled by hand, the tool lowers on to the sample, moves along it and gently rises up.

VW Cutting Tool

Pocket (x30) Microscope | Elcometer 7210

The Elcometer 7210 Pocket Microscope is an extremely practical microscope used for site inspections.

Having x30 magnification and a inbuilt light source, the Elcometer 7210 Pocket Microscope is the ideal choice for close up investigation of defects and surface cleanliness. For a microscope with graduated reticules for coating and crack width measurement: Our W90018568-D is a good option.