Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.
For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.
Large surfaces area probes for soft materials (HVCA approved).
For use on flat surfaces.
- Range: 0-200 mils (0-5mm)
- Accuracy: ±1-3% or ±1.0 mil (±20µm)
- Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
- Minimum convex surface radius - Flat Surface
- Minimum concave surface radius - Flat Surface
- Minimum headroom 89mm (3.50")
- Minimum sample diameter: 8mm (0.32")