The all New Elcometer 456 Right Angle Ferrous Substrate Coating Thickness Probe is designed to work with our Elcometer 456 Separate Gauges.
For taking readings in areas with restricted access or head clearance.
This made to order probe has all the accuracy of our right angle probe of standard length with the reach required to measure inside pipes and hard to reach areas. Comes complete with factory Test Certificate.
- Range: 0-60 mils (0-1500µm)
- Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
- Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
- Minimum convex surface radius 4mm (0.16")
- Minimum concave surface radius 25mm (0.98")
- Minimum headroom 28mm (0.98")
- Minimum sample diameter 4mm (0.16")
*Whichever is greater