Product Description
An essential machine for preparing a wide variety of heated and unheated product samples including Li battery membrane formulations, paint, varnish, cosmetics, glue, etc. with total consistency and reproduce-ability on various substrates including contrast charts, sheet steel, plastic foils and glass. All Elcometer 4340 models have 11 preset speeds and adjustable stroke length with quick release system.
- Ideal for testing paint, varnish, cosmetics, glue etc.
- 11 preset transverse speeds, from 0.5-10cm per second
- Sample electrical temperature control to 392°F
- High quality samples produced for highly reliable laboratory testing
- Smooth aluminium table - much smoother than glass - for better repeatability
- Can be used with Elcometer Film applicators
- High precision perforated vacuum table
- Adjustable travel carriage with "stop" at end of travel
|
Interchangeable head attachments
Combined Spiral/Standard Head Attachment
|
|
Durable & Rugged
- Sturdy rigid design to ensure minimal movement during film application
- Up to 15 years of standard use
|
|
Perforated table allows for a wide variety of sample sizes
- Perforations are spaced 1" X 1" apart - equal spacing provides the perfect substrate for glass slides and test charts of most any size or thickness.
|
|
Smooth & multiple concurrent tests
- Use up to 3 film applicators simultaneously
- Test up to 2 Leneta test charts simultaneously
- Able to test up to 2 test areas on perforated tables
|
The Elcometer 4340 Motorized Film Applicators are versatile, rugged and precise. The rigid construction ensures a smooth, consistent application without the ridges often associated with film application.
A range of applicator head attachments is available separately, allowing the user to select the most appropriate for their specific use and Standard (if applicable).
The Elcometer 4340 range of motorized Film Applicators allow the flexibility to test using standard film applicators (filmographs), spiral bar coaters.
Available with a highly engineered table, available with or without a vacuum and heating element, each Elcometer Motorized Film Applicator is accurately measured using a Co-ordinate Measuring Machine to meet an incredibly high level of flatness. (Vacuum tables offer more reproduce-ability).
The average variation on Elcometer Application Tables is 2.3µm (0.092mil), while the average variation on glass used on some low cost tables is 12.0µm (0.48mil).
If a 100µm (4mils) coating is tested, readings taken using an Elcometer table would produce readings between 97.7 (3.9mils) and 102.3µm (4.1mils). On glass, the readings produced would be between 88 (3.5mils) and 112µm (4.48mils) - a 47% variation.
