5 – 120µm | Stainless Steel | Elcometer 3238 Long Edge Wet Film Combs

Product Description

This stainless steel comb is wire eroded to provide an accuracy of ±2.5µm (0.01mil) and are supplied with either Metric or Imperial measurements.

Each comb has 24 measurement stages (teeth) providing a more accurate wet film thickness value.

Using a wet film comb:

Place a comb perpendicular to and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are wet. Remove the comb from the film. The wet film thickness lies between the biggest value ‘coated’ or ‘wet’ tooth and the smallest value ‘uncoated’ or ‘dry’ tooth.