View Shore Durometer Hardness Scale Infographic
Type A Durometers are designed for measuring medium-soft to medium-hard materials such as softer plastics and rubbers (under 50 Shore Hardness Units) often used in power cord insulation and vinyl shoe soles, but have the capacity to measure materials as resistant as solid truck tires and ebonite rubber (up to 100 Shore Hardness Units). For accurate readings, the material under test should be at minimum 0.25" (6.4mm) thick.
The Elcometer 3120 range of Shore Durometers are an easy-to-use solution for testing of material hardness, and have been the standard for hardness measurement since their invention by Albert Ferdinand Shore in 1924. To determine the material's resistance to permanent indentation, more commonly known as hardness, a pointed steel rod indents the material under a fixed force spring. The hardness value, expressed in Shore Hardness Units, is displayed on the dial. Durometers are typically used to measure the hardness of polymers, elastomers, and rubbers.
The different types of Durometer refer to the materials for which they are designed to measure, on a scale of 0-100 Shore Hardness Units. It is important to note that measurements of Shore Hardness Units cannot be used to compare materials across scales (a measurement of 60 Shore Hardness Units taken with an A type Durometer has no relation to a measurement of 60 Shore Hardness Units taken with a D type Durometer).
The Elcometer Shore Durometer can be used either handheld or fitted to an optional stand for increased repeatability of measurement. Elcometer Shore Durometers may also include an optional max indicator, to keep the greatest measurement over the course of several tests. An optional certificate of accuracy may also be included.
Elcometer 3120 Type A and D Durometers may be used in accordance with the following standards: ASTM D 2240, DIN 53505, ISO 868, and ISO 7267-2.
This product includes the Elcometer 3120 Shore Durometer A with Max Indicator, and a booklet of operating instructions.