Product Description
Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.
Contamination can build up, particularly if the blast media is recycled several times. Using the Elcometer 134A Chloride Ion Test for abrasives in the field will accurately identify contamination and prevent costly surface-related failures.
Results are recorded in parts per million (ppm) requiring no complicated calculations. Elcometer 134A test is designed to use a ratio of 1:1 for easy conversation to µg/cm².
Cross contamination, from test to test, is eliminated through one time use of individual components. The components are premeasured to ensure accurate results in parts per million. In addition, no temperature correction is needed from 41ºF to 176ºF. Use this innovative product confidently with any abrasive.
