Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 1” (25mm) and are supplied with a nozzle holder and quick coupling, in a choice of material with a 2” contractor thread. The following Elcometer blast hose assemblies come complete with:
- Blast Hose
- Twinline Pneumatic Remote Control Hose
- DMH II Deadman’s Handle
- Nozzle Holder
- Quick Coupling
Anti-Static and Abrasion Resistant Inner Wall
Elcometer blast hose is abrasion resistant and manufactured out of natural and styrene-butadiene rubber compound with carbon black, in accordance with DIN53516 and has an anti-static rating (R) of less than 106sq/m (10.767sq/ft) to protect the user from static build up.
2 Ply Braid Reinforcement
Elcometer’s blast hose features highly woven cord linings in a 2 ply cross pattern to improve hose strength and allow flexibility.
Tough Outer Cover
Manufactured using abrasion resistant and anti-static natural and styrene-butadiene rubber with a cloth impression,
the tough weather resistant cover prolongs the life of the hose.
Elcometer 1" (25mm) ID 12bar (174psi) Blast Hose Assembly with Nylon Nozzle Holder (Contractor Thread) & Cast Iron Quick Coupling - 10m (32.8ft)
Maximum Working Pressure :12bar (174psi)
Internal Diameter (ID) :25mm (1")
Thread Type :2" (51mm) Contractor
Hose Length :10m (32.8ft)
Outside Diameter (OD) :38mm (11/2")
Minimum Bend Radius :200mm (77/8")
Nozzle Holder :Nylon
Quick Coupling :Cast Iron
Part Number :BH25NCSB-10