|
|
|
Wet Film Wheels
 | By rolling the gauge through a wet coating, the center disc eventually touches the film. This point on the scale indicates the thickness. Various measurement ranges from 0 to 25µm - 0 to 3000µm (0 to 1mil - 0 to 40mils) are available. When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness. |
The Elcometer 3230 Wet Film Wheel is a high precision, accurate and easy to use instrument which consists of a set of three wheels. The central wheel is of a smaller diameter and is eccentric relative to the two outer wheels.
By rolling the gauge through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
A convenient mounting handle for the wheel is available in two lengths; 15cm (6") & 50cm (19"); please order separately.
When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness.
Several measurement ranges between 0 to 25µm and 0 to 3000µm (0 to 1mil and 0 to 40mils) are available.
|
The Elcometer 3230 Wet Film Wheel is a high precision, accurate and easy to use instrument which consists of a set of three wheels. The central wheel is of a smaller diameter and is eccentric relative to the two outer wheels.
By rolling the gauge through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
A convenient mounting handle for the wheel is available in two lengths; 15cm (6") & 50cm (19"); please order separately.
|
This instrument is similar to the Elcometer 3230 Wet Film Wheel, but is designed for use in the coil coating process. The outer wheels are knurled to allow measurements to be taken on slippery coatings or on fast moving substrates. By rolling the gauge through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness. A convenient mounting handle for the wheel is available in two lengths; 15cm (6") & 50cm (19"); please order separately. When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness. Using a wet film wheel: Roll the wheel through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
|
This instrument is similar to the Elcometer 3230 Wet Film Wheel, but is designed for use in the coil coating process. The outer wheels are knurled to allow measurements to be taken on slippery coatings or on fast moving substrates. By rolling the gauge through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness. A convenient mounting handle for the wheel is available in two lengths; 15cm (6") & 50cm (19"); please order separately. When the volume to solids ratio of the coating is known (generally found on the product data sheet supplied by the manufacturer), the wet film thickness can be used to predict the dry film thickness. Using a wet film wheel: Roll the wheel through a wet coating, the center wheel eventually touches the film. This point on the scale indicates the thickness.
|
|
|
|
|
|
