Ultra/Scan Probes

Ultra Scan Probe for Ferrous Substrates | Range: 0-60mils / 0-1500µm | Elcometer 456

Designed to work with any of our Top Ferrous or Top Dual FNF Elcometer 456 Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0-60 mils (1µm: 0-1500µm
• Minimum headroom: 85mm (3.50")
• Minimum sample diameter: 5mm (0.59")

Ultra Scan Probe for Ferrous Metal Substrates | Range: 0-200mils / 0- 5mm | Elcometer 456

Designed to work with any of our Top Ferrous or Top Dual FNF Elcometer 456 Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy: ±1-3% or ±1 mil (±.02mm)
• Resolution: 0.1mil: 0-50mils; 1mil: 50-200mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum headroom: 85mm (3.50")
• Minimum sample diameter: 5mm (0.59")

Ultra Scan Probe for Ferrous and Non-Ferrous Metal Substrates | Elcometer 456

Designed to work with any of our Elcometer 456 FNF Top Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0-60 mils (1µm: 0-1500µm
• Minimum headroom: 85mm (3.50")
• Minimum sample diameter: 5mm (0.59")

Pack of Three (3) Replacement Ultra Scan Probe End Caps | Elcometer 456

Elcometer 456 Replacement Ultra/Scan Probe End Caps (3 per pack): Highly durable and precision milled 'snap on' replaceable probe cap allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

Only works with Elcometer Ultra Scan probes.

Model 456 Scale 1 Ultra/Scan Armored Probe

Designed to work in the harshest environments! Stainless steel wrapped probe cable. Works with any of our Top Ferrous or Top Dual FNF Elcometer 456 Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0-60 mils (1µm: 0-1500µm
• Minimum headroom: 85mm (3.50")
• Minimum sample diameter: 5mm (0.59")