|
|
|
Surface Profile Gauges
 | The profile of a surface will affect the coating’s overall performance. Making surface profile gauge (SPG) readings important for a coatings longevity. The height of the profile (measured from the peaks to the troughs) determines aspects such as adhesion, coverage and overall volume of coating used. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there may be an insufficient key to produce adequate adhesion, leading to premature coating failure. Ensuring the correct surface preparation optimizes the performance of the coating and material usage. Read more information about Surface Profile Gauges |
The Elcometer 224 integral profile gauge provides the very latest in surface profile measuring technology for measuring profile on flat surfaces. Fast, accurate and very user friendly, the Elcometer 224 is available with or without memory and Bluetooth®. The Elcometer 224 is available in two different models: Model B and Model T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.
Replaces 223 Gauge View Separate Surface Profile Gauge
|
The Elcometer 224 separate profile gauge provides the very latest in surface profile measuring technology. Standard and armored probes are available for the separate models, providing even greater measurement flexibility. Accurate, fast and very user friendly, this gauge is available with Bluetooth® and with or without memory. The Elcometer 224 Top model is available with wireless technology and can store up to 150,000 readings in 2,500 batches. The Elcometer 224 is available in two different models: Model B and Model T. Each gauge provides the user with increasing functionality - from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.
Replaces 223 Gauge
|
This easy to use gauge measures the peak-to-valley height of a blast cleaned surface.
The average of a series of measurements provides an indication of the surface roughness and allows the surfaces to be compared as blasting proceeds.
Metric and Imperial versions
|
The Elcometer 119 Pipe Pit Gauge is a pocket sized gauge designed to identify the condition of a pipe.
The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit. The gauge shows the pit depth compared to the nominal pipe wall thickness.
Imperial units only.
|
|
|
|
|
|
