Straight Probes

Straight Ferrous Substrate Probe | Scale 1 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This straight probe is specifically designed to measure the coating on both flat and curved surfaces.

All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 4mm (0.16")
• Minimum concave surface radius 25mm (0.98")
• Minimum headroom 85mm (3.35")
• Minimum sample diameter 4mm (0.16")

Straight Non-Ferrous Substrate Probe | Scale 1 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This straight probe can be used to measure the coating on both flat and curved surfaces.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 10mm (0.39")
• Minimum concave surface radius 10mm (0.39")
• Minimum headroom 85mm (3.35")
• Minimum sample diameter 4mm (0.16")

Straight Dual Ferrous/Non-Ferrous (FNF) Substrate Probe | Scale 1 | Elcometer 456

Designed to work with any of our Elcometer 456 Separate Gauges.

This straight probe can be used to measure the coating on both flat and curved surfaces.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 10mm (0.39")
  • F Mode: 4mm (0.16")
  • N Mode: 26mm (1.02")
• Minimum concave surface radius 12.5mm (0.49")
• Minimum headroom 88mm (3.46")
• Minimum sample diameter 4mm (0.16")
  • F Mode: 4mm (0.16")
  • N Mode: 6mm (0.24")

Straight Sealed-Tip Ferrous Substrate Probe | Scale 1 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Sealed tip engineered for use in high humidity environments or areas where distillates or chemicals are present.

This straight probe can be used to measure the coating on both flat and curved surfaces.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 4mm (0.16")
• Minimum concave surface radius 25.0mm (0.98")
• Minimum headroom 85mm (3.35")
• Minimum sample diameter 4mm (0.16")

Straight Ferrous Substrate Probe | Scale 2 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy*: ±1-3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum convex surface radius 4mm (0.16")
• Minimum concave surface radius 25mm (0.98")
• Minimum headroom 89mm (3.50")
• Minimum sample diameter F Mode: 8mm (0.32")

Straight Non-Ferrous Substrate Probe | Scale 2 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy*: ±1-3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum convex surface radius 100mm (3.97")
• Minimum concave surface radius 150mm (5.90")
• Minimum headroom 88mm (3.46")
• Minimum sample diameter: 14mm (0.55")

Straight Ferrous Substrate Probe | Scale 3 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Supplied with an Elcometer test certificate and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

• Range: 0-500 mils (0-13mm)
• Accuracy*: ±1-3% or ±2.0 mil (±50µm)
• Resolution: 0.1 mil: 0-100 mils; 1mil: 100-500 mils (1µm: 0-2mm; 10µm: 2-13mm)
• Minimum convex surface radius - 15mm (0.59")
• Minimum concave surface radius - 40mm (1.57")
• Minimum headroom - 102mm (4.02")
• Minimum sample diameter: - 14mm (0.55")

Straight Ferrous Substrate Probe | Scale 6 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring thick coatings over ferrous metal substrates. Including, but not limited to: pipe wrap, fireproofing, and polyurea.

Specifications:

• Range: F - 0-980 mils (0-25mm) / N - 0-1200 mils (0-30mm)
• Accuracy*: ±1-3% or ±4.0 mil (±100µm)
• Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
• Minimum convex surface radius - 35mm (1.40")
• Minimum concave surface radius - 170mm (6.70")
• Minimum headroom - 150mm (5.90")
• Minimum sample diameter: 51 x 51mm² (2 x 2 sq. inch)

Straight Non-Ferrous Substrate Probe | Scale 6 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring thick coatings over non-ferrous metal substrates.

Specifications:

• Range: F - 0-980 mils (0-25mm) / N - 0-1200 mils (0-30mm)
• Accuracy*: ±1-3% or ±4.0 mil (±100µm)
• Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
• Minimum convex surface radius - Flat Surface
• Minimum concave surface radius - Flat Surface
• Minimum headroom - 160mm (6.30")
• Minimum sample diameter: 58mm (2.30")

V-Probe Adaptor for Dual Ferrous/Non-Ferrous (FNF) Substrate Probes | Scale 1 and 2 | Elcometer 456

Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.

Suitable for any Elcometer 456 Scale 1 and Scale 2 straight probes.

Jumbo Hand Grip for Ferrous and Non-Ferrous (FNF) Substrate Probes | Scale 1 and 2 | Elcometer 456

Ideal for precision placement for the most accurate results on flat and curved surfaces

Place the probe inside the Jumbo Hand Grip and take measurements - ideal when wearing gloves

Suitable for any Elcometer 456 Scale 1 or Scale 2 straight probes.

Old 456 Models Only | Straight Non-Ferrous Probe | Scale 1 | Elcometer 456

Note: Compatible with older 456 models only (2012 and older). Not for use with new 456 separate models.

This straight probe is specifically designed to measure the coating on both flat and curved surfaces.

All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Old 456 Models Only | Straight Ferrous Probe | Scale 1 | Elcometer 456

Note: Compatible with older 456 models only (2012 and older). Not for use with new 456 separate models.

This straight probe is specifically designed to measure the coating on both flat and curved surfaces.

All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Dual Ferrous/Non-Ferrous (FNF) Probe Housing Adapter | Elcometer 456

This simple fixture has a larger orifice diameter to secure placement of our Elcometer 456 FNF straight probes.

Straight Non-Ferrous Substrate Probe | Scale 3 | Elcometer 456

Designed to work with any of our Dual FNF Elcometer 456 Separate Gauges.

Supplied with an Elcometer test certificate and a set of calibration foils.

Foil sets are appropriate to the scale range.

Suitable for measuring a wide variety of thick coatings over aluminium, copper, brass, and non-ferrous stainless steel. Ideal to for use on aluminium truck bed spray on liners.

Specifications:

• Range: 0-500 mils (0-13mm)
• Accuracy*: ±1-3% or ±2.0 mil (±50µm)
• Resolution: 0.1 mil: 0-100 mils; 1mil: 100-500 mils (1µm: 0-2mm; 10µm: 2-13mm)
• Minimum convex surface radius - Flat Surface
• Minimum concave surface radius - Flat Surface
• Minimum headroom - 170mm (6.69")
• Minimum sample diameter: - 35mm (1.38")