PINIP™ Probes

Ferrous Substrate Plug In Integral Probe (PINIP™) | Scale 1 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Probe attaches to a separate gauge to give it the performance and profile of an integral probe gauge.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 4mm (0.16")
• Minimum concave surface radius 60mm (2.36")
• Minimum headroom 170mm (6.69")
• Minimum sample diameter 4mm (0.16")

Non-Ferrous Substrate Plug In Integral Probe (PINIP™) | Scale 1 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Probe attaches to a separate gauge to give it the performance and profile of an integral probe gauge.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 10mm (0.39")
• Minimum concave surface radius 50mm (1.97")
• Minimum headroom 180mm (7.09")
• Minimum sample diameter 4mm (0.16")

Dual Ferrous/Non-Ferrous (FNF) Substrate Plug In Integral Probe (PINIP™) | Scale 1 | Elcometer 456

Designed to work with any of our Elcometer 456 Separate Gauges.

Probe attaches to a separate gauge to give it the performance and profile of an integral probe gauge.

Specifications:

• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius F Mode: 4mm (0.16") N Mode: 26mm (1.02")
• Minimum concave surface radius 65mm (2.56")
• Minimum headroom 180mm (7.09")
• Minimum sample diameter F Mode: 4mm (0.16") N Mode: 6mm (0.24")

Ferrous Substrate Plug In Integral Probe (PINIP™) | Scale 2 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Probe attaches to a separate gage to give it the performance and profile of an integral probe gauge.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy: ±1-3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum convex surface radius - 4mm (0.16")
• Minimum concave surface radius - 60mm (2.36")
• Minimum headroom - 174mm (6.85")
• Minimum sample diameter: - 8mm (0.32")

Plug In Integral Probe (PINIP™) Non-Ferrous Substrate Probe | Scale 2 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Probe attaches to a separate gage to give it the performance and profile of an integral probe gauge.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy: ±1-3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum convex surface radius - 100mm (3.97")
• Minimum concave surface radius - 150mm (5.90")
• Minimum headroom - 185mm (7.28")
• Minimum sample diameter: - 14mm (0.55")

Ferrous Substrate Plug In Integral Probe (PINIP™) | Scale 3 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Supplied with an Elcometer test certificate and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

• Range: 0-500 mils (0-13mm)
• Accuracy: ±1-3% or ±2.0 mil (±50µm)
• Resolution: 0.1 mil: 0-100 mils; 1mil: 100-500 mils (1µm: 0-2mm; 10µm: 2-13mm)
• Minimum convex surface radius - 15mm (0.59")
• Minimum concave surface radius - 45mm (1.77")
• Minimum headroom - 184mm (7.24")
• Minimum sample diameter: - 14mm (0.55")