eMini Probes

Mini 90° Ferrous Substrate Probe | Scale 1 - 45mm | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring I beam edges, walls of hard to reach areas, as well as walls of pipes or boreholes.

Specifications:

• 45mm
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius 3.0mm (0.12")
• Minimum concave surface radius 6.5mm (0.26")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28")
• Minimum sample diameter 4mm (0.16")

Mini 90° Non-Ferrous Substrate Probe | Scale 1 | 45mm | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring I beam edges, walls of hard to reach areas, as well as walls of pipes or boreholes.

Specifications:

• 45mm
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius 10.0mm (0.39")
• Minimum concave surface radius 8.5mm (0.33")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28"))
• Minimum sample diameter 4mm (0.16")

Mini 90° Non-Ferrous Substrate Probe | Scale 1 | 150mm | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring I beam edges, walls of hard to reach areas, as well as walls of pipes or boreholes.

Specifications:

• 150mm
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius 10.0mm (0.39")
• Minimum concave surface radius 8.5mm (0.33")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28"))
• Minimum sample diameter 4mm (0.16")

Mini 90° Non-Ferrous Substrate Probe | Scale 1 | 400mm | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Ideal for measuring I beam edges, walls of hard to reach areas, as well as walls of pipes or boreholes.

Specifications:

• 400mm
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius 10.0mm (0.39")
• Minimum concave surface radius 8.5mm (0.33")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28")
• Minimum sample diameter 4mm (0.16")

Mini 90° Sealed-Tip Ferrous Substrate Probe | Scale 1 - 45mm | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Sealed tip engineered for use in high humidity environments or areas where distillates or chemicals are present.

Right angled probe with mini measuring head.

Ideal for measuring I beam edges, walls of hard to reach areas, and edges of pipes or boreholes.

Specifications:

• 45mm (1.77")
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 3mm (0.12")
• Minimum concave surface radius 6.5mm (0.26")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28")
• Minimum sample diameter 4mm (0.16")

Mini 90° Sealed-Tip Ferrous Substrate Probe | Scale 1 - 45mm | 6' Cable | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

Sealed tip engineered for use in high humidity environments or areas where distillates or chemicals are present.

Right angled probe with mini measuring head.

Ideal for measuring I beam edges, walls of hard to reach areas, and edges of pipes or boreholes.

Specifications:

• 45mm (1.77")
• 6 foot cable
• Range: 0-60 mils (0-1500µm)
• Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
• Minimum convex surface radius 3mm (0.12")
• Minimum concave surface radius 6.5mm (0.26")
• Minimum headroom 16mm (0.63") - Width: 7mm (0.28")
• Minimum sample diameter 4mm (0.16")

Mini Straight Ferrous Probe | Scale 0.5 | Elcometer 456

The all New Elcometer 456 Mini Straight Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Ideal for measuring coatings on edges, narrow pipes, wire, or small surface areas.

Specifications:

• Length 45mm
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 1.9mm (0.07")
• Minimum concave surface radius - 6.5mm (0.26")
• Minimum headroom - 6mm (0.24")
• Minimum sample diameter: 3mm (0.12")

*Whichever is greater

Mini Straight Non-Ferrous Substrate Probe | Scale 0.5 | Elcometer 456

The all New Elcometer 456 Mini Straight Non-Ferrous Probe is designed to work with our Elcometer 456 Non- Ferrous and Ferrous/Non-Ferrous Separate Gauges.

Ideal for measuring coatings on edges, narrow pipes, wire, or small surface areas.

Specifications:

• Length 45mm
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 6mm (0.24")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater

Mini 90° Ferrous Substrate Probe | Scale 0.5 - 45mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Ideal for edges, narrow pipes and small surfaces areas.

Specifications:

• Length 45mm
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 1.9mm (0.07")
• Minimum concave surface radius - 6.5mm (0.26")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 3mm (0.12")

*Whichever is greater

Mini 90° Non-Ferrous Substrate Probe | Scale 0.5 | 45mm | Elcometer 456

The Elcometer 456 Mini 90 Degree Non-Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Ideal for edges, narrow pipes and small surfaces areas.

Specifications:

• Length 45mm
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater

Mini 45° Ferrous Substrate Probe | Scale 0.5 - 45mm | Elcometer 456

The all New Elcometer 456 Mini 45 Degree Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Angled measurement head and long probe shaft is ideal for measuring difficult to access areas in bore holes or cylinders.

Specifications:

• Length 45mm
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 1.9mm (0.07")
• Minimum concave surface radius - 6.5mm (0.26")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 3mm (0.12")

*Whichever is greater

Mini 90° Ferrous Substrate Probe | Scale 0.5 - 150mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Right angled probe with mini measuring head.

Ideal for measuring the walls of hard to reach areas of pipes or boreholes.

Specifications:

• Length 150mm (5.90")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 1.9mm (0.07")
• Minimum concave surface radius - 6.5mm (0.26")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 3mm (0.12")

*Whichever is greater

Mini 90° Non-Ferrous Substrate Probe | Scale 0.5 | 150mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Non-Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Right angled probe with mini measuring head.

Ideal for measuring the walls of hard to reach areas of pipes or boreholes.

Specifications:

• Length 150mm (5.90")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater

Mini 90° Ferrous Substrate Probe | Scale 0.5 - 300mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Right angled probe with mini measuring head.

Ideal for measuring the walls of hard to reach areas of pipes or boreholes.

Specifications:

• Length 300mm (11.8")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 1.9mm (0.07")
• Minimum concave surface radius - 6.5mm (0.26")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 3mm (0.12")

*Whichever is greater

Mini 90° Non-Ferrous Graphite Probe | Scale 0.5 | 45mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Non-Ferrous Graphite Probe is designed to work with our Elcometer 456 Separate Gauges.

Available in three different probe lengths, these non-ferrous 90° mini probes are programmed using a graphite block as the substrate.

This has a significantly different linearization to the usual N probes, which are set up for aluminium and copper, making them ideal for applications involving non-conductive coatings on graphite substrates typically used in aerospace and high technology marine industries.

Specifications:

• Length 45mm (1.77")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater

Mini 90° Non-Ferrous Graphite Probe | Scale 0.5 | 150mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Non-Ferrous Graphite Probe is designed to work with our Elcometer 456 Separate Gauges.

Available in three different probe lengths, these non-ferrous 90° mini probes are programmed using a graphite block as the substrate.

This has a significantly different linearization to the usual N probes, which are set up for aluminium and copper, making them ideal for applications involving non-conductive coatings on graphite substrates typically used in aerospace and high technology marine industries.

Specifications:

• Length 150mm (5.90")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater

Mini 90° Non-Ferrous Graphite Probe | Scale 0.5 | 400mm | Elcometer 456

The all New Elcometer 456 Mini 90 Degree Non-Ferrous Graphite Probe is designed to work with our Elcometer 456 Separate Gauges.

Available in three different probe lengths, these non-ferrous 90° mini probes are programmed using a graphite block as the substrate.

This has a significantly different linearization to the usual N probes, which are set up for aluminium and copper, making them ideal for applications involving non-conductive coatings on graphite substrates typically used in aerospace and high technology marine industries.

Specifications:

• Length 400mm (15.70")
• Range: 0-20 mils (0-500µm)
• Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
• Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
• Minimum convex surface radius - 6mm (0.24")
• Minimum concave surface radius - 8.5mm (0.33")
• Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
• Minimum sample diameter: 4mm (0.16")

*Whichever is greater