The Elcometer 506 are lightweight, portable and easy-to-use adhesion testers available in analogue or digital gauges and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
The Elcometer 506 are lightweight, portable and easy-to-use adhesion testers available in analogue or digital gauges and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
The design of the Elcometer 506 adhesion testers ensures that a uniform force can be easily applied throughout the range by smoothly rotating the gauge's crank handle, ensuring repeatable results to an accuracy of ±1%.
The Elcometer 506 are lightweight, portable and easy-to-use adhesion testers available in analogue or digital gauges and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
The design of the Elcometer 506 adhesion testers ensures that a uniform force can be easily applied throughout the range by smoothly rotating the gauge's crank handle, ensuring repeatable results to an accuracy of ±1%.
The Elcometer 506 are lightweight, portable and easy-to-use adhesion testers available in analogue or digital gauges and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory.
The design of the Elcometer 506 adhesion testers ensures that a uniform force can be easily applied throughout the range by smoothly rotating the gauge's crank handle, ensuring repeatable results to an accuracy of ±1%.
For use with both the Elcometer 506 and 510 adhesion gauges. Ideal for testing on small surface areas, for measurements over 25MPa (3600psi) and suitable for use on some curved surfaces.
For use with both the Elcometer 506 and 510 adhesion gauges. Ideal for testing on small surface areas, for measurements over 25MPa (3600psi) and suitable for use on some curved surfaces.
For use with both the Elcometer 510 and 506 adhesion gauges. Coatings on concrete, cementitious layers and uneven surfaces can be tested more effectively with the larger 50mm dolly.
For use with either the 14.2 or 20mm dollies with the 506 model. Or for use with either the 10, 14.2 or 20mm dollies with the 510 model.
Please note: Special skirts are also available for testing on thin substrate as using a standard skirt on a thin substrate may cause the substrate to bend or flex during test.
For testing on thin substrate. This skirt is designed to fit tightly around the dollie to prevent a thin substrate from bending or flexing outside the of the dollie diameter during test.
For use with both the Elcometer 510 and 506 adhesion gauges.
For testing on thin substrate. This skirt is designed to fit tightly around the dollie to prevent a thin substrate from bending or flexing outside the of the dollie diameter during test.
For use with both the Elcometer 510 and 506 adhesion gauges.
Can be configured to work with any Elcometer 510 or 506 dollie diameter simply by unscrewing existing skirt from actuator and replacing with a skirt appropriate to the dollie size.
To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.
As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.
To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.
As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.
To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.
As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.
To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.
As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.
To isolate the sample area beneath the dolly, the Elcometer 506 and 510 have a range of different size dolly cutters with separate handles to allow cutter replacement, an arbor is used for 50mm dollies.
As cutters wear out over time the dolly cutter and handle/arbor are sold as individual items.
For safe testing on vertical surfaces, magnetic clamp securely holds the actuator - preventing accidental damage to the surrounding areas. For use with both the Elcometer 510 and 506 adhesion gauges.