The Elcometer 280 is a 'stick type' holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.
Using state of the art electronics, the Elcometer 280 allows users to inspect coatings - without connecting the earth return lead to the component substrate - ideal for inspecting large surfaces and pipelines.
The Elcometer 280 uses the high voltage pulsed DC technique to detect holidays in coatings - even if the coating is damp, dirty or slightly conductive.
From the two stage safety switch, bright LED's and screen icons signifying when the high voltage is on, to the extended ribbing to protect the user from spark creep, the Elcometer 280 sets the standard for high voltage measurement safety.
Using the wide range of probe accessories users can detect porosity / holidays in coatings up to 25mm (1") thick.
Rugged, shockproof and water resistant, each unit is designed for use even in the harshest of environments.
- Specialised extended ribbing
designed to standard EN61010, ribs provide additional protection to the user during use
- Integrated safety trigger switch
switches off the high voltage if released
- Quick release battery pack
fully charged in 4 hours, provides up to 30+ hours of continuous use*
- Earth return lead socket
including ¼ turn lock/release to ensure connection during testing
- Rubberised second hand grip
provides greater control and balance during testing
- Large, waterproof buttons
ideal for use - even in gloves
- High Voltage ON/OFF
separate button minimises risk of accidental switch on
- Clear, backlit LCD display
shows all relevant information, even in dark environments
- Shoulder harness point
strap can be quickly clipped on as required
* the battery life is dependent on selected voltage and load applied - see Technical Specification for more information
Visit Holiday Tests explained for more information on Holiday Detection.
