Pinhole Detectors | Elcometer 270

Spare Rectangular Sponges (Pack of 3) - 150 x 60 x 25mm (6 x 2.3 x 1”)

This item includes a pack of 3 rectangular sponges & wing nut.

Note: This item does not include the metal wand required for using the sponge and wing nut.

** Wetting agent and separate wand adaptor should be below telescopic handle and extension piece

Wetting Agent 50ml (1.7 fl oz)

50ML wetting agent.

Earth Signal Return Lead | 4m (13ft) | Elcometer 266 & 270

Compatible with the Elcometer 266 high voltage holiday detectors & 270 pinhole detectors.

Comes complete with crocodile clip and connection plug.

Spare Roller Sponge Set

This item includes a spare roller sponge, washer, and clip.

Important: These items will not work without the roller sponge wand.

Standard Wand with Flat Sponge

A universal flat sponge to suit almost all applications.

Note: This item is included with the Elcometer 270.

Earth Signal Return Lead | 10m (32 ft. 10 in.) | Elcometer 266 & 270

Compatible with the Elcometer 266 high voltage holiday detectors & 270 pinhole detectors.

Supplied on a drum complete with crocodile clip and connection plug.

420mm (16.5”) Extension Piece

Additional extension pieces can be connected to each other.

Roller Sponge Wand

Ideal for large flat surface inspection.

Long form Certificate of Inspection for Model 270 Wet Sponge Detector

Long form Certificate of Inspection for Model 270 Wet Sponge Detector

Elcometer Inc. is an ISO/IEC 17025:2017 accredited calibration facility. Please visit our website for a downloadable copy of our certificate

Separate Wand Adaptor with Belt Clip

Converts the gauge into a separate pinhole detector, includes remote wand handle, lead, and belt clip.

Telescopic Handle with Belt Clip - Extends to 1m (39”)

Telescopic Handle with Belt Clip - Extends to 1m (39"), ideal for floors or high areas.

Long form Certificate of Calibration with Measurement Uncertainties for Model 270 Wet Sponge Detector

Long form Certificate of Calibration with Measurement Uncertainties for Model 270 Wet Sponge Detector

Elcometer Inc. is an ISO/IEC 17025:2017 accredited calibration facility. Please visit our website for a downloadable copy of our certificate

Elcometer Inc. utilizes a simple decision rule unless otherwise specified, uncertainties are not included in the Pass/Fail determination 

Pinhole Detector | Elcometer 270/4

Voltage: 9V, 67.5V & 90V

• Supplied ready to use
• Automatic sensitivity calibration and voltage checks
• Low battery indicator
• Visual and audible alarms

A wide range of Pinhole Inspection Kits are available.

Pinhole Detector | Elcometer 270/3

Voltage: 9V & 90V

• Supplied ready to use
• Automatic sensitivity calibration and voltage checks
• Low battery indicator
• Visual and audible alarms

A wide range of Pinhole Inspection Kits are available.