Cross Hatch Cutter for Adhesion Tests | Elcometer 107

Cross Hatch Adhesion Tape | ASTM D3359-22 | Elcometer 99

Elcometer 99 Tape is used to assess the adhesion of ductile coatings to metallic substrates according to the ASTM D3359-09, ASTM D3359-17 and ASTM D3359-22 standards. It may be used for both referenced test methods: ASTM D3359 Method A – X-Cut Tape Test and ASTM D3359 Method B – Cross-Cut (Cross Hatch) Tape Test.

This tape has been batch tested at the factory using ASTM Test Method D3330/D3330M, Test Method A. This method is equivalent to the Pressure Sensitive Tape Council (PSTC) 101 standard - commonly known as PSTC 101. A copy of the batch test certificate relevant to each roll is included with purchase.

Cross Hatch Basic Kit | 11 Teeth - 1.5mm Spacing | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Basic Kit | 11 Teeth - 1mm Spacing | Range: 0 - 2mil/50µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Basic Kit | 6 Teeth - 1mm Spacing | Range: 0 - 2mil/60µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Basic Kit | 6 Teeth - 2mm Spacing | Range: 2mil/50µm - 5mil/125µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Basic Kit | 6 Teeth - 3mm Spacing | Range: 5mil/121µm - 10mil/250µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Full Kit w/ ASTM Tape | 11 Teeth - 1mm Spacing | Range: 0 - 2mil/50µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Full Kit w/ ASTM Tape | 6 Teeth - 2mm Spacing | Range: 2mil/50µm - 5mil/125µm | E107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Full Kit with ASTM Tape | 6 Teeth - 1mm Spacing | Range: 0 - 2mil/60µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Full Kit with ISO Tape | 6 Teeth - 1mm Spacing | Range: 0 - 2mil/60µm | Elcometer 107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross Hatch Full Kit with ISO Tape | 6 Teeth - 2mm Spacing | Range: 2mil/50µm - 5mil/125µm | E107

The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Cross-Hatch Cutter | 11 Teeth x 1.5mm | Elcometer 107

Cross-Hatch Cutter | 11 Teeth x 1mm | Elcometer 107

Cross-Hatch Cutter | 6 Teeth x 1mm | Elcometer 107

Cross-Hatch Cutter | 6 Teeth x 2mm | Elcometer 107

Cross-Hatch Cutter | 6 Teeth x 3mm | Elcometer 107

Two Roll Pack, ASTM D3359 Cross Hatch Adhesion Test Tape | Elcometer 99

Buy two rolls and save! 

Elcometer 99 Tape is used to assess the adhesion of ductile coatings to metallic substrates according to the ASTM D3359-17, ASTM D3359-09 and ASTM D3359-22 standards. It may be used for both referenced test methods: ASTM D3359 Method A – X-Cut Tape Test and ASTM D3359 Method B – Cross-Cut (Cross Hatch) Tape Test.

This tape has been batch tested at the factory using ASTM Test Method D3330/D3330M, Test Method A. This method is equivalent to the Pressure Sensitive Tape Council (PSTC) 101 standard - commonly known as PSTC 101. A copy of the batch test certificate relevant to each roll is included with purchase.