Armoured Probes

Armored Straight Ferrous Substrate Probe | Scale 2 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Supplied with reinforced heavy duty stainless steel cable.

Specifications:

• Range: 0-200 mils (0-5mm)
• Accuracy: ±1-3% or ±1.0 mil (±20µm)
• Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
• Minimum convex surface radius 4mm (0.16")
• Minimum concave surface radius 25mm (0.98")
• Minimum headroom 138mm (5.43")
• Minimum sample diameter: 8mm (0.32")

Straight Armored Ferrous Substrate Probe | Scale 6 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This probe comes with heavy duty metal reinforced cables for superior durability and accuracy in harsh environments.

Ideal for measuring thick coatings over ferrous metal substrates. Including, but not limited to: pipe wrap, fireproofing, and polyurea.

Supplied with an Elcometer test certificate, carrying case, and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

• Range: 0-980 mils (0-25mm)
• Accuracy: ±1-3% or ±4.0 mil (±100µm)
• Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
• Minimum convex surface radius - 35mm (1.40")
• Minimum concave surface radius - 170mm (6.70")
• Minimum headroom - 190mm (7.48")
• Minimum sample diameter: 51 x 51mm² (2 x 2 sq. inch)

Straight Armored Non-Ferrous Substrate Probe | Scale 6 | Elcometer 456

Designed to work with any of our Non-Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This probe comes with heavy duty metal reinforced cables for superior durability and accuracy in harsh environments.

Ideal for measuring thick coatings over non-ferrous metal substrates.

Supplied with an Elcometer test certificate, carrying case, and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

• Range: 0-1200 mils (0-30mm)
• Accuracy: ±1-3% or ±4.0 mil (±100µm)
• Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
• Minimum convex surface radius - Flat Surface
• Minimum concave surface radius - Flat Surface
• Minimum headroom - 200mm (7.70")
• Minimum sample diameter: 58mm (2.30")

Straight Armored Ferrous Substrate Probe | Scale 7 | Elcometer 456

Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This probe comes with heavy duty metal reinforced cables for superior durability and accuracy in harsh environments.

Ideal for measuring thick coatings over ferrous metal substrates. Including, but not limited to: pipe wrap, fireproofing, and polyurea.

Specifications:

• Range: 0-1220 mils (0-31mm)
• Accuracy*: ±1-3% or ±4.0 mil (±100µm)
• Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1220 mils (10µm: 0-2mm; 100µm: 2-31mm)
• Minimum convex surface radius - 40mm (1.58")
• Minimum concave surface radius - 170mm (6.70")
• Minimum headroom - 200mm (7.87")
• Minimum sample diameter: 55 x 55mm² (2.17 x 2.17 sq. inch)