|
|
|
Blast Hose Assemblies 12bar (174psi)
 | Elcometer 12bar (174psi) blast hose assemblies are available in 5, 10 and 20m lengths and come complete with a blast hose, a twinline remote control hose, a DMH II deadman’s handle, a nozzle holder and a quick coupling. |
Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 1⁄2" (13mm) and are supplied with a nylon nozzle holder and a cast iron quick coupling with either 1” contractor or 3⁄4" fine threads. The following Elcometer blast hose assemblies come complete with:
|
Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 3⁄4" (19mm) and are supplied with a nylon nozzle holder and a nylon quick coupling with either 1” contractor or 3⁄4" fine threads. The following Elcometer blast hose assemblies come complete with:
|
Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 1” (25mm) and are supplied with a nozzle holder and quick coupling, in a choice of material with a 2” contractor thread.
|
Available in 5 or 10m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 11⁄4" (32mm) and are supplied with a nozzle holder and quick coupling, in a choice of material with a 2” contractor thread.
|
Available in 10 or 20m lengths with a maximum working pressure of 12bar (174psi) and a 3 times safety margin, the following blast hose assemblies have an internal diameter of 11⁄2" (38mm) and are supplied with a nozzle holder and quick coupling, in a choice of material with a 2” contractor thread. The following Elcometer blast hose assemblies come complete with:
|
|
|
|
|
|
