Results 1-20 of 771234
Sort by NameSort by Price
Image - Elcometer 456 Probe Range


All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 ferrous gauges accept any ferrous probe. Non-ferrous probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe. Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes.

Every Elcometer 456 gauge and separate probe is supplied with a Test Certificate free of charge. For separate gauges, the test measurements are generated using factory reference probes.

Need more information? Read our page on choosing the correct probe for coating substrates.

Image - Elcometer 456 Probe Range


All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 ferrous gauges accept any ferrous probe. Non-ferrous probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe. Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes.

Every Elcometer 456 gauge and separate probe is supplied with a Test Certificate free of charge. For separate gauges, the test measurements are generated using factory reference probes.

Need more information? Read our page on choosing the correct probe for coating substrates.

Image - Elcometer 456 Separate Probes


All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 ferrous gauges accept any ferrous probe. Non-ferrous probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe. Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes.

Unless stated, Elcometer separate probes have a maximum operating temperature of 150°C (300°F), PINIP™ probes have a maximum operating temperature of 80°C (176°F).

Every Elcometer 456 gauge and separate probe is supplied with a Test Certificate free of charge. For separate gauges, the test measurements are generated using factory reference probes.

Image - Elcometer 456 Separate Coating Thickness Gauge


The new Elcometer 456 Coating Thickness Gauge sets new standards in measuring dry film thickness; faster, reliable and accurate readings help you become more efficient.

Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Each model level offers increased functionality designed to meet your specific needs. Learn more about the range of Elcometer 456 models by reading our Elcometer 456 model specifications page.

Separate models, with their wide range of probes, provide even greater measurement flexibility.

If you are new to measuring coating thickness, visit our page on learning more about Coating Thickness Gauges.

Image - Elcometer 456 Separate Coating Thickness Gauge


The new Elcometer 456 Coating Thickness Gauge sets new standards in measuring dry film thickness; faster, reliable and accurate readings help you become more efficient.

Beginning with Model E and ending with Model T, the Elcometer 456 is available in four different models. Each model level offers increased functionality designed to meet your specific needs. Learn more about the range of Elcometer 456 models by reading our Elcometer 456 model specifications page.

Separate models, with their wide range of probes, provide even greater measurement flexibility.

If you are new to measuring coating thickness, visit our page on learning more about Coating Thickness Gauges.

Image - Digital Coating Thickness Probes


The Elcometer range of dry film thickness probes, provide reliable and accurate coating thickness measurements on almost any metal substrate, whether ferrous or non-ferrous.

These probes expand on the technology of the Elcometer 456 and Elcometer 355 gauges, and provides each gauge with the diverse versatility required to get the job done.

Are you new to the coating thickness industry, or would simply like more information on our gauges? View our page on learning more about Elcometer Coating Thickness Gauges.

Having trouble deciding which probe is the correct choice? Read our page on choosing the correct probe for coating substrates.

Image - Digital Coating Thickness Probes


The Elcometer range of dry film thickness probes, provide reliable and accurate coating thickness measurements on almost any metal substrate, whether ferrous or non-ferrous.

These probes expand on the technology of the Elcometer 456 and Elcometer 355 gauges, and provides each gauge with the diverse versatility required to get the job done.

Are you new to the coating thickness industry, or would simply like more information on our gauges? View our page on learning more about Elcometer Coating Thickness Gauges.

Having trouble deciding which probe is the correct choice? Read our page on choosing the correct probe for coating substrates.

Image - Digital Coating Thickness Gauges


Digital coating thickness gauges (also known as paint meters) are the most widely used due to their high level of accuracy and they can be used to measure the coating thickness on almost any substrate, whether ferrous or non-ferrous.

Elcometer offer a range of digital coating thickness gauges from the new Elcometer 456 - available with either integral or separate probes, the Elcometer 415 Paint and Powder Thickness Gauge, to the Elcometer 311 Automotive Refinishing Gauge.

Learn more about Coating Thickness Gauges

Image - Digital Coating Thickness Gauges


Digital coating thickness gauges (also known as paint meters) are the most widely used due to their high level of accuracy and they can be used to measure the coating thickness on almost any substrate, whether ferrous or non-ferrous.

Elcometer offer a range of digital coating thickness gauges from the new Elcometer 456 - available with either integral or separate probes, the Elcometer 415 Paint and Powder Thickness Gauge, to the Elcometer 311 Automotive Refinishing Gauge.

 
pinip_probe_scale_2_th.jpg
Price: $527.00
Quantity:  

The all New Elcometer 456 Plug In Integral Probe (PINIP) Ferrous Substrate Probe - Scale 2 is designed to work with our Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Probe attaches to a separate gage to give it the performance and profile of an integral probe gauge.

Specifications:

  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius - 4mm (0.16")
  • Minimum concave surface radius - 60mm (2.36")
  • Minimum headroom - 174mm (6.85")
  • Minimum sample diameter: - 8mm (0.32")

*Whichever is greater

hi_temperature_probe_scale_2_th.jpg
Price: $680.00
Quantity:  

The all New Elcometer 456 Plug In Integral Probe (PINIP) Hi-Temp (480°F) Ferrous Substrate Probe is designed to work with our Elcometer 456 Separate Gauges.

Designed to measure coatings at temperatures up 480°F.

Probe attaches to a separate gauge to give the performance and profile of an integral probe gauge.

Includes two calibration foils that allow calibration over the work piece when at high temperature thereby increasing accuracy by calibrating to the specific magnetic properties of the substrate at temperature.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Specifications:

  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius - 4mm (0.16")
  • Minimum concave surface radius - 60mm (2.36")
  • Minimum headroom - 174mm (6.85")
  • Minimum sample diameter: - 8mm (0.32")

*Whichever is greater

pinip_probe_scale_3_th.jpg
Price: $579.00
Quantity:  

The all New Elcometer 456 Plug In Integral Probe (PINIP) Ferrous Substrate Probe is designed to work with our Elcometer 456 Separate Gauges.

Supplied with an Elcometer test certificate and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

  • Range: 0-500 mils (0-13mm)
  • Accuracy*: ±1-3% or ±2.0 mil (±50µm)
  • Resolution: 0.1 mil: 0-100 mils; 1mil: 100-500 mils (1µm: 0-2mm; 10µm: 2-13mm)
  • Minimum convex surface radius - 15mm (0.59")
  • Minimum concave surface radius - 45mm (1.77")
  • Minimum headroom - 184mm (7.24")
  • Minimum sample diameter: - 14mm (0.55")

*Whichever is greater

right_angle_probe_scale_1_th.jpg
Price: $768.00
Quantity:  

The all New Elcometer 456 Right Angle Dual Ferrous/Non-Ferrous Substrate Coating Thickness Probe is designed to work with our Elcometer 456 Separate Gauges.

Industrially hardened probe housing designed for taking readings where access is restricted.

Automatic substrate detection.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 10mm (0.39")
    • F Mode: 4mm (0.16")
    • N Mode: 26mm (1.02")
  • Minimum concave surface radius 12.5mm (0.49")
  • Minimum headroom 38mm (1.50")
  • Minimum sample diameter 4mm (0.16")
    • F Mode: 4mm (0.16")
    • N Mode: 6mm (0.24")

*Whichever is greater

ultra_scan_probe_th.jpg
Price: $949.00
Quantity:  

The all New Elcometer 456 Ultra Scan Probe for Ferrous and Non-Ferrous Metal Substrates is designed to work with our Elcometer 456 Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*^: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0-60 mils (1µm: 0-1500µm
  • Minimum headroom: 85mm (3.50")
  • Minimum sample diameter: 5mm (0.59")

*Whichever is greater

^When calibrated using a sample of the uncoated substrate.

pinip_probe_scale_1_th.jpg
Price: $656.00
Quantity:  

The all New Elcometer 456 PINIP Dual Ferrous/Non-Ferrous Probe - Scale 1 is designed to work with our Elcometer 456 Separate Gauges.

Probe attaches to a separate gauge to give it the performance and profile of an integral probe gauge.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius F Mode: 4mm (0.16") N Mode: 26mm (1.02")
  • Minimum concave surface radius 65mm (2.56")
  • Minimum headroom 180mm (7.09")
  • Minimum sample diameter F Mode: 4mm (0.16") N Mode: 6mm (0.24")

*Whichever is greater

straight_probe_scale_1_th.jpg
Price: $704.00
Quantity:  

The all New Elcometer 456 Straight Dual Ferrous/Non-Ferrous Substrate Coating Thickness Probe is designed to work with our Elcometer 456 Separate Gauges.

This straight probe can be used to measure the coating on both flat and curved surfaces.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 10mm (0.39")
    • F Mode: 4mm (0.16")
    • N Mode: 26mm (1.02")
  • Minimum concave surface radius 12.5mm (0.49")
  • Minimum headroom 88mm (3.46")
  • Minimum sample diameter 4mm (0.16")
    • F Mode: 4mm (0.16")
    • N Mode: 6mm (0.24")

*Whichever is greater

pinip_probe_scale_2_th.jpg
Price: $576.00
Quantity:  

The all New Elcometer 456 Plug In Integral Probe (PINIP) Non-Ferrous Substrate Probe

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Probe attaches to a separate gage to give it the performance and profile of an integral probe gauge.

Specifications:

  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius - 100mm (3.97")
  • Minimum concave surface radius - 150mm (5.90")
  • Minimum headroom - 185mm (7.28")
  • Minimum sample diameter: - 14mm (0.55")

*Whichever is greater

ultra_scan_probe_th.jpg
Price: $587.00
Quantity:  

The all New Elcometer 456 Ultra Scan Probe for Ferrous Metal Substrates is designed to work with our Elcometer 456 Separate Gauges.

Featuring a highly durable 'snap on' replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas - without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*^: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0-60 mils (1µm: 0-1500µm
  • Minimum headroom: 85mm (3.50")
  • Minimum sample diameter: 5mm (0.59")

*Whichever is greater

^When calibrated using a sample of the uncoated substrate.

straight_probe_scale_1_th.jpg
Price: $421.00
Quantity:  

The New Elcometer 456 Straight, Ferrous Substrate, Coating Thickness Probe is designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.

This straight probe is specifically designed to measure the coating on both flat and curved surfaces.

All Elcometer probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 25mm (0.98")
  • Minimum headroom 85mm (3.35")
  • Minimum sample diameter 4mm (0.16")

*Whichever is greater

straight_armoured_probe_scale_6_th.jpg
Price: $968.00
Quantity:  

The all New Elcometer 456 Straight Armoured Ferrous Substrate Probe is designed to work with our Elcometer 456 Separate Gauges.

This probe comes with heavy duty metal reinforced cables for superior durability and accuracy in harsh environments.

Ideal for measuring thick coatings over ferrous metal substrates. Including, but not limited to: pipe wrap, fireproofing, and polyurea.

Supplied with an Elcometer test certificate, carrying case, and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

  • Range: F - 0-980 mils (0-25mm) / N - 0-1200 mils (0-30mm)
  • Accuracy*: ±1-3% or ±4.0 mil (±100µm)
  • Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
  • Minimum convex surface radius - 35mm (1.40")
  • Minimum concave surface radius - 170mm (6.70")
  • Minimum headroom - 190mm (7.48")
  • Minimum sample diameter: 51 x 51mm² (2 x 2 sq. inch)

*Whichever is greater

pinip_probe_scale_1_th.jpg
Price: $382.50
Quantity:  

The all New Elcometer 456 Plug In Integral Probe (PINIP) Ferrous Substrate Probe - Scale 1 is designed to work with our Elcometer 456 Separate Gauges.

Probe attaches to a separate gauge to give it the performance and profile of an integral probe gauge.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 60mm (2.36")
  • Minimum headroom 170mm (6.69")
  • Minimum sample diameter 4mm (0.16")

*Whichever is greater

straight_probe_scale_3_th.jpg
Price: $646.00
Quantity:  

The all New Elcometer 456 Straight Ferrous Substrate Probe is designed to work with our Elcometer 456 Separate Gauges.

Supplied with an Elcometer test certificate and a set of calibration foils.

Foil sets are appropriate to the scale range.

Specifications:

  • Range: 0-500 mils (0-13mm)
  • Accuracy*: ±1-3% or ±2.0 mil (±50µm)
  • Resolution: 0.1 mil: 0-100 mils; 1mil: 100-500 mils (1µm: 0-2mm; 10µm: 2-13mm)
  • Minimum convex surface radius - 15mm (0.59")
  • Minimum concave surface radius - 40mm (1.57")
  • Minimum headroom - 102mm (4.02")
  • Minimum sample diameter: - 14mm (0.55")

*Whichever is greater

right_angle_probe_scale_1_th.jpg
Price: $995.00
Quantity:  

The all New Elcometer 456 Right Angle Ferrous Substrate Coating Thickness Probe is designed to work with our Elcometer 456 Separate Gauges.

For taking readings in areas with restricted access or head clearance.

This made to order probe has all the accuracy of our right angle probe of standard length with the reach required to measure inside pipes and hard to reach areas. Comes complete with factory Test Certificate.

Specifications:

  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 25mm (0.98")
  • Minimum headroom 28mm (0.98")
  • Minimum sample diameter 4mm (0.16")

*Whichever is greater

straight_probe_scale_2_th.jpg
Price: $587.00
Quantity:  

The all New Elcometer 456 Straight Ferrous Probe - Scale 2 is designed to work with our Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Specifications:

  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 25mm (0.98")
  • Minimum headroom 89mm (3.50")
  • Minimum sample diameter F Mode: 8mm (0.32")

*Whichever is greater

straight_probe_scale_6_th.jpg
Price: $849.00
Quantity:  

The all New Elcometer 456 Straight Ferrous Substrate Probe is designed to work with our Elcometer 456 Separate Gauges.

Ideal for measuring thick coatings over ferrous metal substrates. Including, but not limited to: pipe wrap, fireproofing, and polyurea.

Specifications:

  • Range: F - 0-980 mils (0-25mm) / N - 0-1200 mils (0-30mm)
  • Accuracy*: ±1-3% or ±4.0 mil (±100µm)
  • Resolution: 1.0 mil: 0-100 mils; 10 mils: 100-1200 mils (10µm: 0-2mm; 100µm: 2-30mm)
  • Minimum convex surface radius - 35mm (1.40")
  • Minimum concave surface radius - 170mm (6.70")
  • Minimum headroom - 150mm (5.90")
  • Minimum sample diameter: 51 x 51mm² (2 x 2 sq. inch)

*Whichever is greater

mini_90_probe_scale_1_th.jpg
Price: $768.00
Quantity:  

The all New Elcometer 456 90 Degree - Sealed Tip Ferrous Mini Probe is designed to work with our Elcometer 456 Separate Gauges.

Sealed tip engineered for use in high humidity environments or areas where distillates or chemicals are present.

Right angled probe with mini measuring head.

Ideal for measuring I beam edges, walls of hard to reach areas, and edges of pipes or boreholes.

Specifications:

  • 45mm (1.77")
  • Range: 0-60 mils (0-1500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1mil: 5-60 mils (0.1µm: 0-100µm; 1µm: 100-1500µm)
  • Minimum convex surface radius 3mm (0.12")
  • Minimum concave surface radius 6.5mm (0.26")
  • Minimum headroom 16mm (0.63") - Width: 7mm (0.28")
  • Minimum sample diameter 4mm (0.16")

*Whichever is greater

mini_90_150mm_probe_scale_half_th.jpg
Price: $748.00
Quantity:  

The all New Elcometer 456 Mini 90 Degree Ferrous Probe is designed to work with our Elcometer 456 Separate Gauges.

Right angled probe with mini measuring head.

Ideal for measuring the walls of hard to reach areas of pipes or boreholes.

Specifications:

  • Length 150mm (5.90")
  • Range: 0-20 mils (0-500µm)
  • Accuracy*: ±1-3% or ±0.1 mil (±2.5µm)
  • Resolution: 0.01 mil: 0-5 mils; 0.1 mils: 5-20 mils (0.1µm: 0-100µm; 1µm: 100-500µm)
  • Minimum convex surface radius - 1.9mm (0.07")
  • Minimum concave surface radius - 6.5mm (0.26")
  • Minimum headroom - 16mm (0.63") Width: 7mm (0.28")
  • Minimum sample diameter: 3mm (0.12")

*Whichever is greater

waterproof_probe_scale_2_th.jpg
Price: $856.00
Quantity:  

The all New Elcometer 456 Straight Ferrous Probe - Scale 2 (15 foot cable) is designed to work with our Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Sealed for use under water at depth.

Large diameter probe sleeve for use with diving gloves.

Suitable on both flat and curved surfaces.

Specifications:

  • 15 foot cable
  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 40mm (1.98")
  • Minimum headroom 138mm (5.43")
  • Minimum sample diameter F Mode: 8mm (0.32")

*Whichever is greater

waterproof_probe_scale_2_th.jpg
Price: $1,300.00
Quantity:  

This item is currently out of stock, but can still be ordered.

The all New Elcometer 456 Straight Ferrous Probe - Scale 2 (98 foot cable) is designed to work with our Elcometer 456 Separate Gauges.

For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.

Sealed for use under water at depth.

Large diameter probe sleeve for use with diving gloves.

Suitable on both flat and curved surfaces.

Specifications:

  • 98 foot cable
  • Range: 0-200 mils (0-5mm)
  • Accuracy*: ±1-3% or ±1.0 mil (±20µm)
  • Resolution: 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm)
  • Minimum convex surface radius 4mm (0.16")
  • Minimum concave surface radius 40mm (1.98")
  • Minimum headroom 138mm (5.43")
  • Minimum sample diameter F Mode: 8mm (0.32")

*Whichever is greater

Results 1-20 of 771234
Sort by NameSort by Price